The new closing of trunkings
for easy installation.
With the self-adhesive 3-sided end piece, finishing installation trunkings becomes easier, faster and cleaner. The end piece wraps around the trunking on three sides, reliably conceals cut edges and ensures a professional appearance - even when retrofitted.
Thanks to the integrated adhesive strip, the end piece is permanently fixed to the top section profile. This creates a safe trunking finish without snapping on and without reworking.
Snap-on is a thing of the past.
Stick-on is easier and better.
Traditional end pieces have to be snapped on or trunkings need to be adjusted with additional effort. This takes time, can require rework and does not always lead to an optimally clean result.
The self-adhesive end piece from GGK rethinks the installation trunking finish: it is simply stuck on, conceals visible cut edges and holds reliably on the profile. A small addition becomes a noticeable installation advantage.
Previously: snap on, adjust, rework.
The cover is held securely in place thanks to optimized locking technology. It ensures that the cover sits firmly on the channel and does not come loose, even under of movement or vibration.
New: stick it on, fix it, done.
The stronger wall structure increases the dimensional stability of the profile. This means that the cable duct retains its shape reliably even under pressure, mechanical stress or demanding conditions.
Small addition. Big effect.
Three-sided gripping. Permanently fixed.
The self-adhesive 3-sided end cap makes the closing of the cable duct easier, neater, and safer. In just a few simple steps, you can achieve a professional finish—without any tools, rework, or visible cut edges.
Quick & easy.
Assembled without tools -
without reworking.
Clean look.
No visible cut edges.
Secure hold.
Strong adhesive bond - permanently fixed.
Universally applicable.
Compatible across all materials and series.
Stick on. Close.
Done.
Installation is deliberately kept simple: Prepare the trunking, position the end piece and stick it on. The trunking end piece sits cleanly and securely straight away - ideal for quick installations, retrofitting and professional results in everyday work.
1. Prepare the cover of the trunking
Clean the surface: dust-free, grease-free and dry.
2. Attach the adhesive strip
Remove the first backing film and stick the adhesive strip flush to the end of the cover of the trunking.
3. Slide on the end piece
Remove the second carrier foil and slide on the cleaned end piece with the opening first up to the adhesive strip.
4. Press on the end piece
Press the upper edge over the entire length for 3-4 seconds. Full adhesive strength is achieved after 24 hours.
One end piece.
Many possibilities.
The new end piece can be used across all materials and series. It is suitable for plastic or sheet steel profiles with the same dimensions, such as the LFG, LF-competition or LFS series.
This reduces the variety of items, simplifies warehousing and increases planning reliability - especially for recurring installation tasks and different profile systems.
The self-adhesive 3-sided end piece was developed for practical use: It saves installation time, avoids visible cut edges and provides a reliable finish. This turns a small component into real added value for installers, retailers and planners.
Discover the product in detail:
Information in the product section.
Discover the self-adhesive 3-sided end piece for cable ducts - clean, secure and tool-free installation.
FAQ -
Frequently asked questions for this application:
1. How is the self-adhesive end piece fitted?
The end piece is attached with an integrated adhesive strip. Clean the cover of the trunking, attach the adhesive strip, slide on the end piece and press on briefly - no tools required.
2. Does the end piece hold securely in the long term?
Yes, the strong adhesive bond ensures a firm fit on the profile. Full adhesive strength is achieved after 24 hours.
3. For which profiles is this end piece already available?
The adhesive end piece is currently is currently available for profiles with dimensions of 40x40 mm and 40x60 mm in the color white.